Latest activity
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.at some point i will need to experiment with a dust shoe system. something that will not get in the way of the tool changer. i need some...
-
travis_farmer replied to the thread My Shop Notes.in my bedroom i have a 2 foot X 8 foot counter i would like out in my shop as a work bench/desk. i can make it rugged, but also so a...
-
travis_farmer replied to the thread My Shop Notes.for minimal insulation, i can use that thermal bubble-wrap https://www.amazon.com/dp/B07G64N67F/ for radiant heat thermal barriers. at...
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.a relay pin can be referenced by it's id, "RLY025-34", on the wire sheet start and end. i want to label connectors somehow, too. so the...
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.I have decided the master book will be a spreadsheet. i want at least the following fields: Wire Sheet ID = non-retiring numeric ID...
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.the "roof" on top will be removable, as it will serve as the top raceway. the top raceway will route wires from logic to relays, and...
-
travis_farmer replied to the thread What my Autism is to me.https://youtube.com/playlist?list=PLqjygWFFGMJY425IVGbfEfSwuEd0pB-7T&si=e1nlQHY1ZTEb5apC A YouTube Public Playlist of high-energy...
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.it may be a good idea to layer the controls in a structured way. Power and stepper drivers, Master Logic, Analog, Input, Output and...
-
travis_farmer replied to the thread My 48" X 48" CNC Router Table.Debating on a complete re-wire of the control cabinet when i move to the new shop. My basis for this thought is for ease of debugging...
-
travis_farmer replied to the thread What my Autism is to me.USPO Matt Brown was my first and very best PO!
-
travis_farmer replied to the thread What my Autism is to me."is there anybody out there looking out for me? just say you want me. just say you need me."
-
travis_farmer replied to the thread What my Autism is to me.Indian folk metal about surviving bullies (i think).
-
travis_farmer replied to the thread What my Autism is to me.Indian (India) folk metal about suicide, and how to stay strong and survive.
-
travis_farmer replied to the thread What my Autism is to me.so, my mother thinks that i keep going into these Fugue states (dissociative fugue), but after looking those up, those are entirely...
-
travis_farmer replied to the thread My Shop Notes.i am wondering if my little diesel heater would be enough to maintain heat out in my shop when i am not out there... it has not been run...
